The correct mount

-for better power transmission

Cut-off wheels and grinding discs are mounted to the machine with side flanges. The flange elements are responsible for transferring power to the disc.  For reasons of safety it is extremely important that defective or incorrect flanges are not used.

– and for more safety

The use of wheel flange FL 76 provides increased lateral stability and user control, specifically when using thin cut-off wheels with a flat form and diameter of 180mm and 230mm.

The applicable regulations and standards must be complied with when using the wheel flange.The contact surface and diameter of the wheel flange must match. Using wheel flanges with diameters that do not match is prohibited.

Depressed centre grinding discs

4 – 7 mm thickness